Suction device for spindel motors iSA series

Suction device

Internal use

The isel dust and chip extractors are accessory components for milling spindles of isel Germany AG. They are used for the extraction of light dusts and chips during dry machining.

They are not suitable for coarse, heavy and wet chips, which can lead to clogging and cannot be removed and transported by means of extraction technology.

Functionality

isel dust and chip extractors consist of a milling spindle-specific base plate and side parts attached to it, on which strip brushes are mounted all around. The strip brushes prevent chips from being ejected from the extraction area and enable extraction even on 3-dimensional workpieces and fixtures. However, the best extraction result is achieved when machining sheet material.

For an optimum extraction result, the suction volume at the hose connection should be at least 200 m³/h and the tools should not protrude beyond the brush length.
The brushes used are wearing parts that must be replaced if necessary. For this purpose, they can be removed individually and fastened to the side parts.